Comments
-
Hi @MERCURYIT, Thanks for getting the calculation done. I agree with you. We may need to troubleshoot on this in real-time. Please get access to SonicWall appliance and one of the SSLVPN clients, contact our support team for further assistance. Have a good one!!!
-
Hi @DJHURT1, Thank you for visiting SonicWall Community. It is appropriate to use WPA2 EAP for 802.1x authentication. You can add a new VAP and replace it later to the existing APs. This should also work.
-
Hi @HEALTHHUB, Thank you for visiting SonicWall Community. We have often seen such scenarios and we were focused to check the default gateway on the devices that are connected to X0 and X7 interfaces along with windows firewall or client AV running on the end devices needs to be disabled to test the communication. In your…
-
Hi@ BSNRICK46037, Thank you for visiting SonicWall Community. Could you please check if the SFP module used by you is as per the Supported List from SonicWall? Let us know how exactly you are trying to measure the speed between the SFP links.
-
Hi @AJISHLAL, Thanks for sharing the situation. You will be notified on the support ticket for further updates and happenings.
-
Hi @FREDFERNANDES_137, Thank you for visiting SonicWall Community. Are you trying to disable the TZ 350W's radio and then planning to utilize the SonicWave with same wireless network SSID's and IP address range?
-
Hi @NINAD94, This looks to be me like a GUI regression. One suggestion is to download the TSR and check the LB status in there to confirm this as a regression or bug. Let us know how it goes.
-
Hi @MIKE11224466, Please try to check for the access rule in WAN to LAN view. The rule must include the service object for port TCP 81. Please have this rule disabled for time being till you perform the scan. Once the scan is done. Please enable the rule back.
-
Hi @leangf_88, Thank you for visiting SonicWall Community. Yes, I have tested the NSM On-Prem 2.1 version. The pre-requisite are, Supports ESXi 6.5+, and Hyper-V Minimum System Requirements: 16GB RAM, 4 Cores CPU Hope this helps.
-
Hi @HUMPHB, Please open up a support case with out support team to work real-time on this issue.
-
@LARRY - Please take assistance from our support team.
-
Hi @DJHURT1, May be the logging is not enabled for all categories in the SonicWall. Please try performing a packet capture on the SonicWall for the source IP address of the machine from where you are trying to access the webex. This could give you a clue.
-
Yes, thanks @DJHURT1.
-
Hi @DJHURT1, Thank you for visiting SonicWall Community. I would suggest you to remove the domain from Trusted Domain list and access the website once. Please verify the logs on the SonicWall to identify the root cause. You can also perform packet capture on the SonicWall appliance and try accessing the website. We should…
-
@SIMONSCHUCK - The incorrect policy is applied based on the user authentication (if you are using). Are you using user authentication like SSO or ULA on the firewall? If yes, the issue is something related to this.