Comments
-
Hi @NILL, Thank you for visiting SonicWall Community. Please contact our Customer Service team with the serial number of the SonicWall appliance and they can help you with this. Hope this helps.
-
Hi @SIMONSCHUCK, Thank you for visiting SonicWall Community. When the firewall is restarted all the connections happening via the firewall are reset. In your case, you are seeing the sessions resume because once the firewall comes online the source device still has all connections opened on its end and it will try to…
-
Hi @MERCURYIT, Thank you for visiting SonicWall Community. The SSLVPN or GVC throughput normally depends on the bandwidth at SonicWall installed location and VPN client location respectively. IMO, you should be able to get between 1/3 and 1/2 of the lowest bandwidth on either side.
-
Hi @SONICADMIN80, Thanks for your efforts to narrow down the issue. Please report this issue to our support team to file a bug.
-
@MIKE11224466 - Could you please share the "Zone" (LAN or any custom zone) of your camera located behind the firewall? Also, please share the address object name of your camera IP address on the SonicWall. I can give you the precise steps.
-
Hi @FRANKE, This should work. No need of any manual routes. Routes will be auto-configured by the SonicWall when you configure the X0 and X5 interfaces with respective IP subnets. X0 and X5 can be on same zone or you can have X5 on a different zone. Only change required on the SonicWall is, please ensure X0 zone (LAN) to…
-
Hi @SONICADMIN80, This needs to be investigated further. Could you please contact our support team to report this issue?
-
Hi @SONICADMIN80, Thank you for visiting SonicWall Community. As per the support matrix shown below, the settings import from TZ 500 to TZ 670 is legitimate. We should be able to migrate settings successfully. Since you have issues with the VPN policies not visible, this needs to be documented and verified. Could you…
-
Hi @DANIEL_LILJA, Thank you for visiting SonicWall Community. Let me test this and get back to you. Thanks for your patience.
-
Hey @GARYMAN - Are you able to access this website from Windows 7 and 10 machines after following my suggestion from previous comment? Please let me know.
-
Hi @AJISHLAL, Thanks for the sharing the update. You can continue to follow up on the support case and share the data.
-
Hi @FRANKE, Passing traffic from 192.168.1.2 to 192.168.1.35 (The Luxul Switch) with subnet mask of 255.255.255.0 and 192.168.1.2 to 192.168.2.1 (The Luxul Switch) with subnet mask of 255.255.0.0 will not happen via SonicWall since the IPs are part of the same subnet. The switch is going to handle the traffic and SonicWall…
-
Hi @MSMFARHAN, Thank you for visiting SonicWall Community. I would recommend you to contact our SonicWall sales team to get precise answer to your question. I'm also checking internally on this and if I get any data, I'll share it here.
-
Hi @MIKE11224466, Yes, set the access rule to block the port TCP 81 for time being when the scan is performed and after procuring the results, please set the rule back to allow for camera access. Hope this helps.
-
Hi @DESTAVENER, Thank you for visiting SonicWall Community. Please check if the steps listed in the below web-link is what you are looking for. This KB is meant for all models of SonicWall firewalls and not bounded to any specific models. Hope this helps.