Ajishlal Community Legend ✭✭✭✭✭
Reactions
Comments
-
Universal Health Services says 250 US facilities were hit by a cyber attack TYPE: CYBERCRIME Universal Health Services (UHS), a health care network with more than 400 facilities in the United States, Puerto Rico and the United Kingdom, suffered an aggressive cyber attack - perhaps the largest - in US history during the…
-
Hi @Douglas If you want control applications such as rdp / teamviewer accsss, You can use below KB to achieve that. https://www.sonicwall.com/support/knowledge-base/how-can-i-block-teamviewer-using-application-control-advanced/170505625393025/
-
Hi @shiprasahu93, Well noted & thank for your support 🙏. Best regards Ajish
-
Hi @shiprasahu93 well noted. I couldn't find any signature related Kraken Fileless attack but found some signature in GAV related about kraken.
-
Hi @Darshil, As I know that, You can get the all rules if you download a tech report that will include all of the config in your Sonicwall in human-readable format by going to: Diagnostic > Download Report From CLI, Please use below KB,
-
Hi @Wes If you are using the SonicOS 6.5.4.5 / 6.5.4.6., Traffic from the access VLAN member port does not make it to the firewall. So upgrade your Firewall Firmware to SonicOS 6.5.4.7 then remove the switch and re-add the switch again and configure the switch port for the VLAN.
-
Hi @Wes Please follow the below SonicWALL KB; If The SonicWave using the Wireless Cloud Management system;
-
Hi @Lucas Moreover try to exclude the server from CFS policy.
-
hi @Lucas if you are suspecting the authentication packet preventing by Firewall, Please try to disable the DPI in WAN to LAN access rule.
-
Hi @Lucas Try to change the translated source to X0 IP.
-
Hi @Lucas Try as same as the screenshot;
-
Hi @Ilya, Create a NAT policy as same as below, Instead LAN subnet choose "Firewalled subnets".
-
Hi @Lucas, Please check your IPS settings. If you enable the "Low priority attack" PING will get block.
-
Hi @Halon5 Regarding the switch configuration, As I understood that the configuration you applied on the switch such as VLAN, Voice VLAN or QoS all are saving in Firewall since the switch is coupled with the Firewall & all configuration/changes done through the Firewall GUI, the configuration must be saved in the firewall…
-
Hi @Halon5 Since you are 15 Year old partner, As you know about the SonicWALL RMA procedure for the H/W replacement. The SonicWALL RMA policy is regardless of the product which is having the 24X7 Support subscription. (Except EOL Product's) Repair & Return Policy "Contact SonicWall Customer Support Center if you think you…