Ajishlal Community Legend ✭✭✭✭✭
Reactions
Comments
-
Hi @Halon5 Please see the general Warranty & support policy. https://www.sonicwall.com/support/support-services/#toggle-id-4 SonicWall warranty and support agreements provide technical assistance during standard coverage hours, typically 8×5 or 24×7. A SonicWall technical specialist will work remotely with you to diagnose…
-
Hi, It seems bug/temporary issue and now I am able to login the WCM
-
I tried login to wcm.sonicwall.com instead login to cloud.sonicwall.com but getting below error message.
-
Hi @SEBASTIAN , You can achieve your goal through SonicWALL Policy based routing.
-
Hi @snkipg Please check the Server user/group session timeout and maximum user allowed. Session Timeout (Minutes) :Sets the duration of user inactivity before a session terminates. Valid Input: The default is 0, which means that the session never times out. Enable Session timeout: If enabled, user sessions terminate after…
-
Hi @Alberto With SSO, local users who are not logged in to the configured domain will not be redirected to login. Resolution; First make sure you have configured the firewall access rule for implementing ULA and the rules as same as below; Rule #1 Action - Allow From Zone - LAN To Zone - WAN Service - Any Source - Any…
-
Hi @sbrantl. See also; Assume the net-gear switch interface is 1Gbps. Auto-negotiation must be enabled on both sides. You must have a CAT 5e cable WITH correct pinning (ALL 8 cables / 4 pairs) to be able to run GIGABIT. A Gigabit cross over cable, crosses ALL 4 Pairs (the cross over cables that USED to come with PRO’s only…
-
As well as I noticed that, the email alert attachment have different time frame compare with the Firewall and WCM alert time.
-
Hi @SEBASTIAN For configuring NAT over VPN in a site to site VPN, Please follow below KB.
-
Hi @Darshil Please find the article for resolving the GMS/Analyzer disk space issue. NB: Analyzer is now EOL no support.
-
Hi @GrahamBarnes The log message is generated when the SSL Handshake between the client and the SonicWall fails. The error # indicates that the failure is due to the SSL / TLS Protocol version suggested by the client (in its Client Hello) was rejected by the SonicWall. The SSL / TLS version suggested by the client could be…
-
Hi @Micah Thank you & well noted.
-
Hi @Cesar ; Please follow the below steps; Step 1: On the SonicWall, Navigate to System |Diagnostics. Choose Ping in the “Diagnostic utility” drop down in the Sonic OS Standard and Enhanced firmware. (In 6.x firmware Click Tools > Diagnostics). Step 2: Ping your ISP’s Default Gateway or any IP that is pingable on the…
-
@Larry Recommended to contact your local SonicWALL supplier to get a POC of WCM & sonicwave. During the POC you can access and see the all features of WCM.