Ajishlal Community Legend ✭✭✭✭✭
Reactions
Comments
-
Hi @Sliderhome Multicast snooping on Sonicwall Firewall to forward/distributed the traffic in a precise manner according to the Internet Group Management Protocol (IGMP). see the below cisco KB regarding the multicast snooping. First you would have to try the sonicwall multicast snooping feature according to the above…
-
Hi @Sliderhome For controlling the multicast traffic, You can enable the Multicast snooping in Sonicwall. Multicast Snooping: (Navigate to Firewall Settings --> Multicast) Enable Multicast - This checkbox is disabled by default. Select this checkbox to support multicast traffic. Require IGMP Membership reports for…
-
Hi @Saravanan @Chris , The issue due to the sonicwall "wdTask is STOPPed" as per the console log report. As per the support team, They submitted this issue to back team as high priority bug and they are working diligently to address the issue.
-
Hi @MichaelA, Please find the below article for the resolution;
-
Hi @MichaelA , Try to adjust the X1 duplex mode;
-
Hi @ACETech , Can you make sure the L2 Switch port (where you connected the sonicwave) added the Guest VLAN ID/Tag which you configured for the Guest VLAN in firewall.
-
Hi @GoDale , could you please share below information about your SOHO; Current firmware version ? Are you trying the Virtual office portal from LAN / WAN Zone? Make sure the SSL VPN access is enabled on the zone. Which browser are you trying to open the portal? some of the browser wont support the default SSL VPN plugin…
-
Hi @KyleL , Please make sure your LDAP Referrals configured properly & while 4600 get slow while user login time, please do the LDAP test connection on the same time. NB: If you don't have multiple subdomains or multiple LDAP server other than the primary, Please disable the highlighted enabled field and try. Then check…
-
Hi @SWuservpn, I always prefer different DHCP pool for GVC users. Do one think configure one empty Firewall port for GVC ( Dont connect any cable on that port) & configure a different subnet for the GVC and its should be under LAN Zone. For example follow the below screen shot. LAN Interface: GVC Interface (Should be empty…
-
Hi @banyuputih While doing the bandwidth test, disable the Antivirus and firewall from your pc/laptop.
-
Hi @Chirag , WAN switch is most important for the Firewall HA implementation. For your reference please see the below network diagram. For the high availability for WAN & LAN switch recommended to add stack switches NB: HA does not support Portshield interfaces.
-
Hi @SWuservpn Hi Please make sure you enabled the DHCP relay as same as below;
-
Hi @SWuservpn Can make sure your DNS of your Ethernet & Wifi is same? If you are using a host name, please try once using its IP address instead. If that works, the problem has to do with DNS resolution.
-
Hi @SWuservpn Since its happening in your all computer, Please check your Router Ethernet interface is enabled any port security / ACL for the service restrictions.
-
Hi @HCECENES_93 First you would have to update your Firmware to latest. Then make sure once you created the MAC address object, its resolving the IP address.