Ajishlal Community Legend ✭✭✭✭✭
Reactions
Comments
-
Hi @Steven430 , For testing purpose, disable the NAT policy which you suspected and try to ping any public IP from your server and observe the behavior. If still you have the ping drops, please check your network topology of your Firewall and Switch connections. especially where you have multiple links between switches and…
-
Hi @Steven430 Additionally create a route policy for the exchange server and try. For example follow the below screen shot. NB: If you are using Exchange Network Load Balance IP for NAT (Virtual Interface), You have to tweak the NAT policy.
-
Hi @Mike11224466, PCI DSS standard comes to CCTV, when its required the Physical Security, To comply with the standard, you must use security cameras AND/OR access control in any sensitive areas. Sensitive areas are defined as below: “Note: ‘Sensitive areas’ refers to any data center, server room or any area that houses…
-
Hi @samaj For preventing the unauthorized VPS Server SSH access, First you would have to configure your VPS server Firewall (If this linux based VPS, IP-table or CSF must have to configure) and white list your public IP for the SSH access.
-
Hi @DiagoFernandes , Please try to use SonicWall migration Tool. NB: TZ 470 not listed in the migration tool https://migratetool.global.sonicwall.com/
-
Hi @Healthhub, As well as the above steps, please make sure the IPS low priority attacks is disabled. If you enable the low priority attack, ping service will get block.
-
Hi @RandyKane , May I know did you import the certificate into the Sonicwall from the LDAP Server? If its not, Please follow the below KB;
-
Hi @Chris @Saravanan , Fyi, The issue not due to the latest firmware that I confirmed because on of my Gen5 is running on 5.9.1.13 & that also faced the same issue but this time i got the console logs except the TSR ( TSR not able export / not showing) and submitted to the support team. As per the support they have opened…
-
Hi @R20 , SonicOS Enhanced zones allows you to apply security policies to the inside of the network. This allows the administrator to do this by organizing network resources to different zones, and allowing or restricting traffic between those zones. This way, access to critical internal resources such as payroll servers…
-
Hi @Ben_Bissett , If your mac is sierra, Please follow the below KB article.
-
Hi @preston As per his above statement, 636 port is not able to connect from the server itself. If he want to use the LDAP over TLS, he must have to configure the server first and enable the required ports.
-
Hi @Saravanan @Mike11224466 CGI: HTTP Security Header Not Detected : 81 / tcp --> This message doesn't mean port 81 scan fail. Its mean that port in the camera not have comply the HSTS ( HTTP Strict Transport Security) CGI: Session Cookie Does Not Contain the "Secure" Attribute: 81 / tcp --> If your web application uses…
-
Hi @RandyKane, LDAPS communication occurs over port TCP 636. LDAPS communication to a global catalog server occurs over TCP 3269. When connecting to ports 636 or 3269, SSL/TLS is negotiated before any LDAP traffic is exchanged. Please follow the below KB for achieving your goal; Once you configure the LDAP Over SSL port…
-
Hi @Roz Please login into the console and try "show" command. NB: Not sure with new models. Above command is using in X-series switch for showing running system information.
-
Hi @R1chR, Please follow the below steps; Open your mysonicwall account -->Navigate to the Tenant Product and choose all tenants then select the product which you want to transfer to another tenant --> click on Transfer products. In the pop up menu select the tenant where you want to move the product & click on Transfer.