Ajishlal Community Legend ✭✭✭✭✭
Reactions
Comments
-
Hi @Benoit, If you have Local DNS server, You can follow the the below KB: If you don't the local DNS server, You must have to add the Server host static IP in your local machine host file, For example if you are using Windows machines; Go to Start > run Notepad. Right click on the Notepad icon and select Run as a…
-
Hi @Georgewm In that case i will recommend to you to use the SSL VPN. most of the home internet connections are blocking the GVC traffic.
-
Hi @Georgewm try with different ISP or your mobile data. Might be your current Home ISP is blocking the GVC traffic.
-
Hi @Edika This could be happen if your VB version is outdated.
-
Hi @Medusanyc Was your issue resolved? If so please mark the reply as the answer & like it to help other community members to find the helpful reply quickly.
-
Hi @T16 There are two different ways to implement HA on Azure, either Active/Passive, or Active/Active. Active/Passive closely resembles Active/Passive of a SonicWall appliance with the exception that the new primary has to signal to Azure that it is the primary to move the VIP (Virtual IP Addresses) – there are no MAC…
-
Hi @Medusanyc uninstall and try if your server is installed any third party software such as CCleaner. Some old software trying to communicate with old protocols.
-
Hi @Halon5 1st change the cable if it's not help adjust the interface duplex mode (Auto negotiate) to manual and select 1Gbps and try. 3rd check your Switch interface port will support 1Gbps ( Check interface port configured with full duplex or not) for testing connect the same switch port with PC/Laptop Giga interface.
-
ISP wont admit their mistakes / issues.
-
Hi @Medusanyc If you are suspecting the new sonicwall unit, Exclude the Server from Firewall security, Exclude from GAV, IPS and etc. and try.
-
Hi @Medusanyc If you are using Gen7 sonicwall unit, try to access the diag page as same as below steps; Instead the "management_ip" enter your firewall X0 IP. https://<management_ip>/sonicui/7/m/Mgmt/settings/diag As well as Gen7 unit cipher control page; You can Navigate to Network\Firewall\ Cipher Control.
-
Hi @AronS As per the security prospective it's not recommended to open the RDP ports. For the terminal services access, recommended to use Sonicwall SSL VPN / GVC.
-
Hi @AronS This is seems to some internal app/backdoor trying to make connection to some unknown WAN IP (LAN to WAN). I also faced the same issue and created LAN to WAN deny rule as well as WAN to LAN.
-
Hi @Medusanyc The page where you are trying to login is a Firewall Diagnostic page not regular Firewall GUI. Try to login into the Firewall without mention the diag page link. Once you login the Firewall, then change the main.html to diag.html and enter, you would be reach to the below screen and click the "Internal…
-
Hi @JohnG, After complete the above steps as per @Saravanan, You would have to add that subnet / or Server IP in SSLVPN Client Routes; For that Navigate to the SSLVPN-->Client Settings-->Edit the Default Device Profile-->Client routes-->Add the Server Subnet/IP-->Ok