TKWITS Community Legend ✭✭✭✭✭
Reactions
Comments
-
You should not have to manipulate any of the auto-generated rules. Is your connection to your ISP bridged (e.g. you have a public IP address on your WAN interface)? Do you have management enabled on your WAN interface on port 443?
-
You cannot use a Sonicwall to create the CSR, you have to create the CSR using openssl or DigiCert's tool. Once you have the private key and certificate chain, then you can upload it to each device and use it.
-
You have given very little information for us to go by. Post more information about your setup.
-
So is the consensus that '5018' is not stable? I at least appreciate some of the fixes that have been ailing me for almost a year im looking at you "GEN7-25830 The Use Address Object drop-down menu does not display the Address Object created by the user in the GATEWAY AV EXCLUSION LIST."
-
https://lmgtfy.app/?q=%22NetExtender-9.0.0.274.MSI%22
-
This needs to be addressed. Thank you for bringing it others attention.
-
A site to site VPN with 'local network' as ANY should only be used in specific circumstances. Start with a simple VPN. Create a temporary network on an extra interface on both Site As and Bs TZ400. Then, with devices connected to the extra interfaces for testing, create a VPN tunnel so that both test devices can…
-
I would be willing to try to replicate the issue if you find the trick.
-
Interestingly I have the same results in PMTU and Traceroute to 8.8.8.8, though from an internal PC a trace route completes. TZ570 on 7.0.1-1456. 3 33.3 ms 16.6 ms 33.3 ms 24.58.216.121 4 16.6 ms 16.6 ms 16.6 ms 24.58.38.50 5 33.3 ms 33.3 ms 16.6 ms 24.58.32.58 6 33.3 ms 50.0 ms 33.3 ms 66.109.6.74 7 33.3 ms 33.3 ms 33.3…
-
Good to know @BWC
-
I'll take a stab at this. Zero Touch and NSM are still a work in progress. I'd say using Zero Touch to implement the device would be problematic using a L2 bridge on the WAN interface. If the device was already in place as a L2 Bridge, you could add it to NSM. Just depends on when you are using ZT + NSM during…
-
You can't edit or delete auto-created routes based on interface creation. Have you looked into using routed mode on the guest vlan? Not sure if it'll work for you, but somehting to read up on.
-
It's because it is managed through NSM which is supported.
-
I ran into this the other week while using Firefox. Using a Chromium-based browser seemed to resolve it. I haven't had to login since. Gosh I dislike web developers favoring Chromium...
-
You should specify the sub-version of the firmware when posting. Sonicwall OS 7 has had plenty of issues up to and including the latest (7.1465). I use TOTP and do not have this issue on 7.1465.