MustafaA SonicWall Employee
Reactions
Comments
-
The firewalls won't restart but the firewall will lose license synchronization. You need to reset the trust between the firewall and the license server, as described in the KB article. Once this is done you can enter the MySonicWall.com creds.…
-
Yes, that should be correct.
-
You need to enable SSLVPN on the WAN zone. Make sure you have the Client Routes configured as well as the VPN Access for the user or group.
-
Are you able to make the connection and access the resource from a Windows computer with the same user creds?
-
Yes, that is correct as @Arkwright also highlighted.
-
MIB (Management Information Base) file is a database that contains configuration and management information of the firewall to be used in conjunction with the SNMP protocol. An SNMP management system, that can monitor the device, uses these database files to interpret the messages sent by the firewall. A few examples of…
-
For instance; Site-A has X0 subnet 192.168.20.0/24 and X0:V40 192.168.40.0/24 Site-B has X0 subnet 192.168.10/24 Site-A VPN Config: Local Network: X0 Subnet 192.168.20.0/24 + X0:V40 Subnet 192.168.40.0/24 Remote Network: X0 subnet 192.168.10/24 which is based on VPN Zone. Site-B VPN Config: Local Network: X0 subnet…
-
Hoping that I understood you correctly, the VLAN subnet in question, should be part of the Local/Remote Network negotiation, if it is policy base VPN. If it is route based VPN, you have to adjust the routing policies.
-
Glad to read that the issue is resolved, @Eddie .
-
Which firewall vendors have that feature, @Alexander_Bertol ?
-
This is a typically (80-20 principle) due to Access Rule. That's the first thing I would check.
-
@Alexander_Bertol , what is the objective and requirement?
-
@Eddie , what is your SSLVPN IP Pool? What is the source IP 192.168.0.221?