Comments

• Hi @tejasshenai Could you check "diag show cpu" and "diag show processes" and "diag show multicore" on CLI. in additonaly share TASK PART OF TSR log.

  in High CPU utilization Comment by MitatOnge February 2022
• I think there is no find excatly number of signal strengt of clients. Because of Radio Signal is a wave not like electricty signal. Signal effects every things ( Wall, Door, cordless phones, windows, plasterboard, and office equipments.) therefore you cannot find out actual strength numbers. is there Other brands signal…

  in SonicOS 7 wireless client signal strength Comment by MitatOnge February 2022
• Hi @Simon_Weel , You should create the DNS Forwarder ON dns settings for this domain for the local dns servers.

  in TZ470 - failed in DNS resolve Comment by MitatOnge February 2022
• Your welcome @ShamanJon 👍️

  in Can't add NetBios address group Comment by MitatOnge February 2022
• Hi @IT346 , You should change the backend server interface in the /Device/Settings/Administration/Management/BACKEND SERVER COMMUNICATION

  in Sonicwall DNS Mysonicwall issue Comment by MitatOnge February 2022
• did you check below steps. 1) enable user login on SSLVPN interface such as X1. 2) ssl-vpn server settings enable sslvpn on the WAN zone 3) and sslvpn server settings ports is 4433

  in SSL VPN when 443 is already configured for another service Comment by MitatOnge February 2022
• Hi @Tg1986 You have to enable on the phyical interface like X3 and than enable on subinterfaces.

  in App flow and vlans part 2 Comment by MitatOnge February 2022
• Hi @ShamanJon You cannot assign to broadcast ip as a address object. You should enable netbios over sslvpn on the client setting and add access rule on the SLVPN zone. like below screenshot.

  in Can't add NetBios address group Comment by MitatOnge February 2022
• Hi @EllisMcPickle2022 You can re-assign new port on Network/SSL VPN/Server Settings / SSL VPN SETTINGS/SSL VPN PORT

  in SSL VPN when 443 is already configured for another service Comment by MitatOnge February 2022
• Hi @Larry , Actualy there is no easy way for backend servers. 3 ways come to my mind. I used two of these 1) Custom list is usefull for static backend servers. 2) SMA proxy is usefull for dynamic backend servers. I used to Universities global libraries access for roaming Students and Academics. 1) Custom List for backend…

  in How to cope with Geo-IP blocking and add exceptions now Comment by MitatOnge February 2022
• Hi @MPERU99 Could you check address group in the IpHelper menu. I guess, Some addresses are using by IpHelper service.

  in Ip address can not be all zero in Address Group used by IpHelper. Comment by MitatOnge February 2022
• Hi @BobWHill you can find article for CFS

  in How do you attach different CFS policies to different zones, such as for office LAN and public WiFi? Comment by MitatOnge February 2022
• Hi @Chojin 1) Src Interface is X0 , is it isolated guest network? 2) traffic is going to X0 to X6. "Filecoder_DN10" is ransom virus. please check the source system with SentinelOne and Kaspersky and ESET. 3) I think some viruses want to access to other pcs.

  in GMS: check which file was blocked by Gateway Anti Virus Comment by MitatOnge February 2022
• If you dont select "Report DROPPED Connection" on app flow, you cannot see. Please could you share "Appflow/ Flow Reportings/Settings" screen shoot? In fact, sometimes a misconfigured sql query or similar nginx-based client side web queries can cause this. I suggest you do a detailed inspection on your web server.

  in Traffic stays on lower LB interface Comment by MitatOnge February 2022
• 1) Check connection peak status on system page. 2) Can you assign connection limit on your all access rules. 3) change probe destination on LB groups. 4) Change HA logic probe on HA menu. I suppose, some user or server are attacking to somewhere.

  in Traffic stays on lower LB interface Comment by MitatOnge February 2022
More Comments