MarkD Cybersecurity Overlord ✭✭✭
Reactions
Comments
-
How can I configure additional Administrator User profiles in SonicOS Enhanced? | SonicWall
-
call Verizon's technical support, ask what firewall rules need to be put in place for Wifi Calling, change your security policy
-
Mirror / SPAN on a managed switch to which the uplink of the firewall is connected. NOTE: This option is NOT available on TZ models! How to configure Port Mirror in Switching | SonicWall
-
my understanding is that the licence applies to the security services and appliance support. The license should not affect the configuration of a VPN
-
What do you mean by 20x20 / 50x50 both the TZ and NSA have a number of SKU's - part codes
-
looks like it could a physical issue with the interface. For 1Gb use auto/auto for 10/100 set the speed and duplex to match the upstream device. You could change the X1 to another physical interface to determine IF its a hardware fault
-
. I just want to filter out outbound traffic of these subnets in another VNet. Did all the VNEt Peering too. Do I understand correctly, you want to apply rules between the Virtual desktop and VM servers?
-
You will first need a mysonicwall account and a tenant name to apply the license key to From there you can navigate to product management Free Trials, from there you can obtain a trail license key which can be applied to a virtual machine that you will need to be built in your environment. step by step guide below - Have…
-
Check out the knowledge base article below and raise a support case DDNS Dyn.com showing network error | SonicWall This issue has been reported on our Gen 5, Gen 6, and Gen 7 firewalls. Our development team has worked on a hotfix to address this problem. If you encounter this issue, please create a support ticket and…
-
Unless there is a need to firewall those subnets , which by disabling all the features you seem to have done move to Min full rate Layer 3 switch and let the firewall enforce the policies elsewhere. 2960x layer 2.5 :) not enough grunt to L3
-
I don't believe Gen 6 will be developed any further after LRM date Active Retirement Mode was April 2022 . maintenance fixes will be provided on the current 6.5 until end of support - development will be on the new Gen 7 and not the G6 cavium architecture. Time for an upgrade check out the product life cycleNSa Series…
-
Are you using unified policy or classic? I had some similar anomalies
-
I would start with the basics. Making sure the NX client has the correct and can access the Logon servers, DNS servers, DNS suffix is correct in order for it to correctly enumerate AD. I've not seen an issue with GP's being applied over the VPN Also look at the LOGONSERVER variable to see if you actually have a logon server
-
In that command you are running a TCP syn scan with NMAP. it does appear you are blocking outbound TCP from that client (at least for the default 1000 port list) If your NMAP client is not blocked and all ports were open on the firewall you should see TCP 443 (googles dns over HTTPS) 8.8.8.8 UDP 53 and 8.8.8.8 does also…
-
Static ARP is definitely not the way to go as Arkwright says Static DHCP + DHCP persistence