Ajishlal Community Legend ✭✭✭✭✭
Reactions
Comments
-
Hi @pinaldps Please check the Ping is enabled on management interfaces.
-
Hi @Teleporter I am also using SonicOS7 and its working fine for me. Firmware version: SonicOS 7.0.0-R906
-
Hi @aschultz, Make sure the connected network cable is working. Make sure the connected port either in Switch or Firewall is enabled. Check the switch are you using port-security or not. If you are using make sure your host MAC is allowed. If you created static ARP for the host, Remove the static ARP and try. Make sure the…
-
Hi @Teleporter In this scenario, You have to choose the DDNS bound to interface is "ANY" instead choosing X1 or X2. Try above settings and let us know.
-
Hi @CGracheff Then how the HTTP management interface came in your screenshot? without enabling the "Allow management via HTTP", it will not show that icon in interface feature.
-
Hi @INE Try below steps Check your Server have any AV engine with Firewall service / policy If it's possible connect the both subnet servers directly connected to the Firewall interface and do the test Check both subnet under the LAN Zone or custom zone. If it's custom zone, check the zone based security services. Increase…
-
Hi @suptran Create a batch file with below script and configure it on startup. Assuming you already deployed the MSI & the certificate. %PROGRAMFILES(X86)%\SonicWAll\SSL-VPN\NetExtender\NECLI.exe addprofile -s 192.168.100.1:4433 -u %UserName% -d LocalDomain Just replace 192.168.100.1:4433 with the desired server IP…
-
Hi @Al_Rex , Try with below command and let me know. It will fetch your Firewall all interface hardware details but I am not sure it will show the SFP Serial number. diag show ipnet interfaces
-
Hi @Mezta1988, If you are blocking the "Facebook Inc" under the app control / Social networking, Disable the SSL Activity 1 signature block and try. NB: Since Facebook acquire the WhatsApp, WhatsApp & Facebook using same SSL incoming to the clients.
-
Hi @MARTINMP, Can you share here your Unifi USG firewall and your Sonicwall site tosite VPN tunnel configuration? Payload processing failed indicates there is a mismatch of proposals during phase 1 or phase 2 negotiation between a site-to-site VPN.
-
Hi @Al_Rex try diag show debug interface X10 ( if SFP connected X10)
-
Hi @gsitton Additionally you can make the power shell script as batch file and run once the VPN connection establish.
-
Hi @CGracheff As per your screenshot, You enabled the "Allow management via HTTP", Disable the"Allow management via HTTP" and try ( it's not recommended). For Disable that, Navigate to Device / Settings / Administration --> Management
-
Hi @gsitton Once you confirm the above steps, update the GPupdate through powershell in localhost; Invoke-GPUpdate -Force
-
Hi @gsitton when they connect through the VPN, they are authenticating to the domain? netbios / DNS is enabled over VPN?