Ajishlal Community Legend ✭✭✭✭✭
Reactions
Comments
-
Hi @Saravanan what about the maximum cable length for the HA?
-
Hi @BWC Ruckus also I noticed that integrity & PRF algorithm should be same for connecting to the Sonicwall IKeV2 proposal.
-
Hi @Rinconmike If the connection usage showing/increasing after disabling the SSL client inspection, Make sure to disable the Server SSL inspections as well.
-
Hi @bdfdcapt32 You can create static ARP for those servers for reserving the DHCP released IPs. For configuring the STATIC ARP, Navigate to the Firewall, Network-->ARP -->Add-->enter the DHCP leased IP & corresponding the MAC.
-
Hi @subhash_chopra For the workaround to get CT working on windows 10. Navigate to the device manager --> Expand the Network adapters -->Make sure the L2TP and PPTP are enabled if not enabled / reinstall with generic drives on the pc. Restart the PC/Laptop . Go to services.msc check if remote access connection manager is…
-
As well as make sure to enabled the IKE dead peer detection.
-
Hi @Nazimmulla07 Try to change DH Group: Group 1 to at least 5. If you are using encryption or authentication algorithms with a 128-bit key, use Diffie-Hellman groups 5, 14, 19, 20 or 24. If you are using encryption or authentication algorithms with a 256-bit key or higher, use Diffie-Hellman group 21
-
Hi @Pjohnson , Hmm got the pain point. In this case we cannot use the Windows DHCP server for reserving the IP for client but we can resolve this issue with LINUX based DHCP Server. In Linux based DHCP Server, you can reserve IP in DHCP pool by hostname & not required MAC address. For Example you have to configure the…
-
Hi @Pjohnson Yes. Once you configure the internal server in SMA for passing the DHCP request for the NetExtender clients, Open DHCP, right click on Reservations and then click on “New Reservation” to create a new reservation of an IP address for a particular Netextender client MAC address. 2. On New Reservation console,…
-
Hi @Panchabhai You can download 30-day free trial of next-generation virtual firewall from below link. Also for few FAQ's on Nsv link below:
-
Hi @Panchabhai Follow the below NSv7 user guide for Hyper-V
-
Hi @Pjohnson A new option is available on SMA appliances running newest firmware, which is NetExtender with dynamic IP address scope (DHCP). This feature simplify and unifies functionality of NetExtender clients connectivity. Scope can be taken either from internal DHCP server or from devices providing such functionality.
-
Hi @Pjohnson, If you have internal DHCP Server (Windows), it's possible to do the DHCP reservation based on the the client MAC address.
-
Hi @shultis , That I am not aware but it was recommended by sonicwall support when i was faced the same issue. Once you removed the unused FQDN, observe the logs & unit health.
-
Hi @westtechllc I used Huawei E8372 E8372h-320 4G LTE USB Modem. (up to DL 150 Mbps/s/UL:50 Mbps).