Ajishlal Community Legend ✭✭✭✭✭
Reactions
Comments
-
@MWATech Check the user has enabled the SSL VPN service as well as the Zones-WAN- Make sure the enabled the "Enable SSL VPN Access".
-
@Yadgar Got your pblm. The Zenmate VPN is showing unknown category that's why its showing the error. But you can block through the signature level. Follow the below screenshot.
-
@Larry Either Site to Site VPN tunnel or VPN client (GVC/SSLVPN, if need only single host required to remote print) will help you. While adding/installing the printer, choose IP instead using the netbios name.
-
@Kevin_Verbeek For your scenario, Either you can use NAT Over VPN tunnel or DHCP Over VPN.
-
which firmware version are you using?
-
in SonicWALL 10G interface we cannot adjust the duplex.
-
@Yadgar Try to upgrade the latest firmware and do the test and let us know.
-
@Yadgar Follow the below KB for the App Control configuration.
-
@HebronICT Yes its possible. First you would have to make the X2 as your primary interface in Failover & LB ( Do not add X1 in the LB) so it will be use for your download traffic. Once you done the above step, Create a PBR for uploading traffic and choose your X1 interface. For example see the below screen shot for the PBR.
-
Did you change the Fiber cable? If the ISP device is cisco, disable the autonegotiate and try.
-
@JDrakes due to many reason it can happen 7 try to check below steps; For testing purpose disable all UTM feature such as GAV, IPS etc and check. Make sure the SFP module is not used or faulty as well as the Fiber media. Choose the appropriate SFP / SFP+ from the supported list to match the Sonicwall and the other end…
-
@rrincones what kind of the error message are you getting while connecting to RDP?
-
@Darshil If you are not enabled UTM Security, you will be get the same speed what your ISP offer ( TZ400 have only 1GbE interfaces)
-
@JNolan Let us know the current firmware version. If its old version, pls try to upgrade and do the test.
-
@MattF The Virtual MAC address allows the High Availability pair to share the same MAC address, which dramatically reduces convergence time following a fail-over. Convergence time is the amount of time it takes for the devices in a network to adapt their routing tables to the changes introduced by high availability.…